Archivo de la categoría: Marcas

Audio-Technica OC9ML3

The OC9ML3 replaces the critically acclaimed OC9MLII. Building on the enduring reputation of its predecessor, the OC9ML3 features a special line contact stylus embedded into a low profile solid boron cantilever, ensuring the music signals read by the tip of the stylus are transmitted reliably to the coils.

The OC9′s “VC mould” design ensures stability and rigidity whilst the dual moving coil offers excellent stereo separation and improved frequency response for long lasting performance.

The use of PCOCC wire (Pure Copper by Ohno Continuous Casting), a special copper with virtually no transverse crystal barriers to impede signal transmission, perfects the performance of the advanced dual coil design.

Type: Moving coil (MC)
Frequency response: 15 to 50,000 Hz
Output voltage: 0.4mV (1 kHz, 5 cm/sec.)
Channel separation: 30 dB (1 kHz)
Channel balance: 0.5 dB (1 kHz)
Tracking force: 1.8 to 2.2 g (standard: 2.0 g)
Coil impedance: 12O(1kHz)
DC resistance: 12 O
Recommended load impedance: Min. 100 O (when head amplifier is connected)
Coil inductance: 25µH (1 kHz)
Static compliance: 35 x 10 – 6 cm/dyne
Dynamic compliance: 18 x 10 – 6 cm/dyne (100 Hz)
Stylus: Line contact stylus (curvature radius: 40 x 7µm)
Cantilever: 0.26 mm diameter solid boron
Vertical tracking angle: 23 degrees
Dimensions: 17.3(H) x 16.8(W) x 25.7(L) mm
Weight: 8.0 g

Precio: €699,00

Audio-Technica AT33EV

The A33EV isa ½ inch, standard mount 0.3 x 0.7 mil elliptical cartridge featuring a tapered Duralumin cantilever which reduces the effective mass of the cartridge, resulting in a more durable cantilever. The Dual Moving Coil cartridge design increases channel separation and extends the frequency response range delivering extraordinary audio quality. Internally constructed with a neodymium magnet enhances magnetic energy and PCOCC wire for pure audio transmission.

Elliptical stylus chip and durable duralumin tapered pipe cantilever.
10O mid impedance specifications.
Dramatically increased magnetism with neodymium magnets and PCOCC as the coil.
High separation, wide-response dual moving coil.
VC Mold eliminates unnecessary vibrations.
“Hanenite” anti-vibration rubber eliminates unwanted vibrations.
Type: MC-type
Playback frequency range: 15-50,000Hz
Output voltage: 0.3mV (1kHz and 3.54cm/sec.)
Channel separation: 30dB (1kHz)
Output balance: 0.5dB (1kHz)
Stylus pressure: 1.8-2.2g (2.0g standard)
Coil impedance: 10O (1kHz)
DC resistance: 10O
Load resistance: More than 100O (when head amp connected)
Coil inductance: 22µH (1kHz)
Static compliance: 40×10-6cm/dyne
Dynamic compliance: 10×10-6cm/dyne (100Hz)
Stylus needle shape: Oval (0.3×0.7mil)
Cantilever: Duralumin tapered pipe
Vertical tracking angle: 23°
Dimensions: H16×W16.6×D26.5mm
Weight: 6.9g
Accessories: Non-magnetic screwdriver × 1, Washer × 2, Protector × 1, Cartridge installation screws 13 mm × 2 and 19 mm × 2, Nut × 2, Brush × 1, PCOCC lead set × 1